On-Board Vehicle Weighing Systems

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighing’s new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the truck’s chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

• TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

• Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

BENEFITS

¿¿¿ Maximize payload capacity

¿¿¿ Axle Watch — axle weight and overload indication

¿¿¿ Trailer identification

¿¿¿ Accuracy — better than 2.5% (90 -110% of FSD)

¿¿¿ Reduce vehicle wear and tear and fuel consumption

¿¿¿ Protect your license

¿¿¿ Avoid fines and overload endorsements

¿¿¿ Simple to operate

¿¿¿ Balanced load distribution

¿¿¿ No driver input required

¿¿¿ Axle and gross overload warnings

¿¿¿ 7.5–50 tonne GVW

¿¿¿ Rugged for harsh environments

Additional Information:

• Production Capacity: 100 Per Month
• Delivery Time: 30 DAYS

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighing’s new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the truck’s chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

• TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

• Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

BENEFITS

??? Maximize payload capacity

??? Axle Watch — axle weight and overload indication

??? Trailer identification

??? Accuracy — better than 2.5% (90 -110% of FSD)

??? Reduce vehicle wear and tear and fuel consumption

??? Protect your license

??? Avoid fines and overload endorsements

??? Simple to operate

??? Balanced load distribution

??? No driver input required

??? Axle and gross overload warnings

??? 7.5–50 tonne GVW

??? Rugged for harsh environments

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighings new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the trucks chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

 TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

 Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

BENEFITS

 Maximize payload capacity

 Axle Watch - axle weight and overload indication

 Trailer identification

 Accuracy - better than 2.5% (90 -110% of FSD)

 Reduce vehicle wear and tear and fuel consumption

 Protect your license

 Avoid fines and overload endorsements

 Simple to operate

 Balanced load distribution

 No driver input required

 Axle and gross overload warnings

 7.5-50 tonne GVW

 Rugged for harsh environments

Additional Information:

• Item Code: TRUELOAD
• Production Capacity: 100 Per Month
• Delivery Time: 30 DAYS

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighing’s new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the truck’s chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

• TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

• Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

 BENEFITS

??? Maximize payload capacity

??? Axle Watch — axle weight and overload indication

??? Trailer identification

??? Accuracy — better than 2.5% (90 -110% of FSD)

??? Reduce vehicle wear and tear and fuel consumption

??? Protect your license

??? Avoid fines and overload endorsements

??? Simple to operate

??? Balanced load distribution

??? No driver input required

??? Axle and gross overload warnings

??? 7.5–50 tonne GVW

??? Rugged for harsh environments

Additional Information:

• Production Capacity: 100 Per Month
• Delivery Time: 30 days

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighing’s new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the truck’s chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

• TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

• Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

BENEFITS

¿¿¿ Maximize payload capacity

¿¿¿ Axle Watch — axle weight and overload indication

¿¿¿ Trailer identification

¿¿¿ Accuracy — better than 2.5% (90 -110% of FSD)

¿¿¿ Reduce vehicle wear and tear and fuel consumption

¿¿¿ Protect your license

¿¿¿ Avoid fines and overload endorsements

¿¿¿ Simple to operate

¿¿¿ Balanced load distribution

¿¿¿ No driver input required

¿¿¿ Axle and gross overload warnings

¿¿¿ 7.5–50 tonne GVW

¿¿¿ Rugged for harsh environments

Additional Information:

• Production Capacity: 100 Per Month
• Delivery Time: 30 Days

Approx. Rs 2 Lakh / UnitGet Latest Price

PREVENT FINES AND VEHICLE WEAR BY MONITORING AXLE WEIGHTS

OPTIMIZE YOUR PAYLOAD AND AVOID FINES

Benefit from load monitoring, fleet tracking and payload optimization with ADITYA  On-board Weighing’s new overload protection system. TRUELOAD is specifically designed for larger capacity vehicles up to 60 tonne (66 tons), with mechanical and/or air spring suspension

offering vehicle weight indication as standard for individual axles and vehicle gross, this overload protection system incorporates patented technology. Utilization of state of the art solid state sensors ensures maximum durability in harsh environments and since there are no moving parts it is not susceptible to wear or slipping out of calibration because of stretched springs which are common in other axle load monitoring systems. For continuous monitoring of load conditions, it can also be linked to third party tracking software and is compatible with all options offered.

TRUELOAD is a simple to operate, durable, low cost positive contribution to safe driving

THE IDEAL SOLUTION FOR MONITORING OF LOAD AND OVERLOAD

TRUELOAD  is overload monitoring, load distribution and payload optimisation for use on vehicles with steel spring or air suspension or a combination of the two.

AXLE LOAD MONITORING
Combinations of our patented axle transducers and/or air pressure transducers obtain the loading information of each axle or axle group. With TRUELOAD sensors, all truck combinations can be monitored without modifying the truck’s chassis or frame structure. No moving parts between the frame and the spring allow high durability and no wear as on typical encoder sensors. 

• TRUELOAD axle transducers that measure suspension deflection for use on mechanically spring suspension systems. Sensors are glued onto spring, no welding or bolting, easy and safe installation. 

• Air pressure transducers for use on air suspension systems. In order to support all known chassis types, various system options can be configured using either of the above transducers or certain combinations of the two.

BENEFITS

¿¿¿ Maximize payload capacity

¿¿¿ Axle Watch — axle weight and overload indication

¿¿¿ Trailer identification

¿¿¿ Accuracy — better than 2.5% (90 -110% of FSD)

¿¿¿ Reduce vehicle wear and tear and fuel consumption

¿¿¿ Protect your license

¿¿¿ Avoid fines and overload endorsements

¿¿¿ Simple to operate

¿¿¿ Balanced load distribution

¿¿¿ No driver input required

¿¿¿ Axle and gross overload warnings

¿¿¿ 7.5–50 tonne GVW

¿¿¿ Rugged for harsh environments

Additional Information:

• Production Capacity: 100 Per Month
• Delivery Time: 30 days